Omega Engineering”sSA1-RTD is a surface-mount temperature sensor that supports flat orcurved surfaces and provides Class A accuracy for critical temperaturemonitoring applications. Based on a 2 x 2 x 0.8 mm thin-filmplatinum RTD, the sensor is available in PFA-insulated three- orfour-wire configuration (connectors optional). The sensor can be installed using aself-adhesive backing, or it can be permanently mounted using OMEGABONDcements. Available in one meter (40″), two meter (80″), threemeter (120″), or custom lengths. The sensor can be tailored for use ina variety of applications, such as monitoring chip, heat sink,and environmental temperatures in electronic devices; checkingpiping or ducting temperatures; and monitoring motor and transformercore heat and test insulation capabilities.
Courtesy of Endress+Hauser
