Conforms to FDA 177.2600 Requirements

NewAge Industries”Urebrade polyurethane hose is now made from non-toxic ingredients thatconform to the Food and Drug Administration’s standard 177.2600 (rubberarticles intended for repeated use). The hose is designed to handlerepetitive flexing and abrasion and is suited for wet and fatty foodapplications and beverage processing. The hose is practical forindustrial uses such as air lines, pneumatic control systems androbotics, low-pressure hydraulics, chemical transfer, vacuum equipment,granular material lines, oil and fuel supply, and petroleum-basedproduct transfer. Urebrade isproduced from a compound that, in addition to conforming to FDAstandards, is listed by the National Sanitation Foundation’s StandardNSF 61 for drinking water system components. The compound is anether-based polyurethane reinforced with an open mesh polyester braidto allow greater pressure capabilities over unreinforced tubing.Urebrade’s resistance to flow contamination, moisture, fungi,weathering, tearing, impact, and radiation exposure, along with itsappropriate use at temperatures ranging from –90 F (-67 C) to 175 F (79C), make it a preferred choice. Urebrade is manufactured in atransparent formulation in sizes from 1/4″ through two inches I.D. Forindustrial applications, opaque black color hose from 1/4″ to 3/4″ I.D.is available at a reduced price. Both versions are well stocked forimmediate delivery. Custom services such as cut-to-length pieces,heat-formed shapes, other sizes and colors, thermal bonding, and hoseassemblies are available.