For General Vibration Measurements

VIP SensorsModel 2010A is a stud-mountedpiezoelectric accelerometer with integral electronics (IEPE) forgeneral vibration measurements on structures and objects.  Itfeatures a high signal-to-noise ratio, a high output sensitivity, and awide bandwidth up to 10 kHz.  The accelerometer transmits its lowimpedance voltage output through the same cable that supplies theconstant current power. The Model 2010A design is sealed againstexternal contamination. The accelerometer features a side connectorthat is used with a 10-foot coaxial cable terminated with a 10-32connector for error-free operation.