Bosch Rexroth’s CD26-PL is a pneumatic ISO plug-in valve manifold system from Rexroth. In accordance with ISO standard 15407-2, the simultaneous pneumatic and electrical connection for the valve is done on the base plate. The design concept is based on the proven CD01 modular system. The CD26-PL has a width of 26 mm. The advantage of this plug-in solution is the ability to exchange the valves faster, easier, and safer. Manifold-threaded ports are available in both NPT and ISO-G (BSPP). Valve functions include single and double solenoid and double 3/2 valves, allowing two functions from the same valve position, saving space and expense. Sandwich regulators are available for lateral and vertical stacking. The valve manifold system can be used in all areas that require standardized ISO valves, such as the packaging industry, automotive industry, for machine tools, and in the printing and paper industries. The system is available in a multi-pin plug version with a D-sub connector. Using this type of connection, the system can be directly combined with the BDC, VDS, and DDL bus systems from Bosch Rexroth. Available bus protocols include PROFIBUS DP, CANopen, DeviceNet, INTERBUS S, and ControlNet. An Ethernet connection via the Ethernet I/P protocol is also possible.