AIR ATOMIZING NOZZLE: A spray nozzle that combines both air and liquid to produce very fine droplet sizes in a controlled manner.
CLIP-ON: A spray nozzle designed to simply “clip” over a pre-drilled pipe by using a stainless steel spring clip.
EDUCTOR: An item used to mix fluids in a tank that uses a unique venturi design, which enables smaller pumps to circulate large volumes of tank solution.
FLAT SPRAY: A spray nozzle that produces a flat, fan-shaped spray pattern.
FLOODING NOZZLE: A wide, flat-shaped spray pattern with low impact.
FLOWRATE: The amount of fluid flowing through a spray nozzle at a given pressure.
FULL CONE: A spray nozzle that produces a circular, full-cone pattern, with uniform distribution throughout the cone.
HIGH IMPACT FLAT SPRAY (FP): A flat and thin spray with sharp definition on all edges.
HYDRAULIC ATOMIZING (C): A very fine hollow-cone spray using only the liquid pressure for atomizing.
QUICK DISCONNECT: A spray nozzle designed to allow fast and easy installation and removal of spray nozzle tips.
SPRAY ANGLE: The diameter, width or characteristics of the spray flow from the nozzle.
SPRAY NOZZLE: A tool used to spray a liquid that controls the amount of liquid and the spray angle of the liquid.
SQUARE SPRAY: (SQ) Full-cone spray pattern, with uniform distribution throughout a square cone.
TWISTER: Nozzles with larger flowrates and smaller droplet sizes. Looks like a corkscrew.
VENTURI EFFECT: The reduction in fluid pressure that results when a fluid flows through a constricted section of pipe. BEX Eductors are designed to take advantage of this effect.
BEX Spray Nozzle (www.bex.com) a leader in the spray nozzle industry with over 50 years experience, provided the terms and definitions for this word search.