Video Q&A Discusses Corrosion-Resistant Weld Overlay Cladding for Valves
The following Q&A interview with De Tomi QA/QC Manager, Pietro Branca, explains the process of corrosion-resistant weld overlay cladding.
Q: What is weld overlay cladding?
A: Weld overlay cladding is a process to deposit a thin layer of material on components.
Q: When and where would this technique be applied?
A: Weld overlay cladding is applied to improve the corrosion resistance of the material of the component.
Q: What are some of the typical cladding materials?
A: Yes, typical cladding materials are alloy and nickel alloys and stainless steel.
Q: The overlay process, is it manual or automatic?
A: Both—the main process is automatic but you can do some parts with manual processing.
Q: Now your company is applying the weld overlay process to ball valve components. In your experience, is there any restriction to the shape or size of components that can be cladded?
A: From experience there is only a restriction on the holes. If the diameter of the holes is less than 13 millimeters it’s impossible to do the process.
Q: Final question, is this an easy technique to apply?
A: No it is not an easy technique because there are a lot of technical parameters to control. For example, heat input, the speed of the filler metal and so on.
This post is courtesy of Alloy Valve Stockist. The video was originally published by Valve World.
