1 | polyethylene piping system
The COOL-FIT PE Plus pre-insulated polyethylene piping system from GF Piping Systems offers higher thermal efficiency, reduced maintenance and operational costs, and faster installation time. It includes a complete range of pre-insulated pipe, fittings, valves and hoses that efficiently convey brine, glycol, ethanol and cooled water in temps from 58°F to 140°F. All surfaces are sealed, vapor-tight and UV-resistant. The system is maintenance-free and will not corrode over time.
2 | transit-time ultrasonic flowmeter
SonoPro Commercial & Water Series transit-time ultrasonic flowmeter from VorTek Instruments offers high accuracy, reliable flow metering. The innovative design incorporates matched precision transducers and signal processing circuitry to accurately measure the flow of most liquids over a wide range of velocities. SonoPro meters are available with clamp-on or insertion transducers. They are suitable for heating and cooling systems, energy metering and chemical metering applications.
3 | ultrasonic flowmeter
KROHNE’s OPTISONIC 6300 V2 ultrasonic flowmeter offers a stationary, clamp-on design that allows users to measure flow anywhere while processes continue. New to the V2 is a viscosity range of up to 200 cSt, no need for re-greasing due to solid coupling material, a next-generation signal converter for enhanced application range, Namur NE107 diagnostics and integrated thermal energy calculation. It is suitable for diameters from 1/2 inch to 160 inches. It has a process temperature range of -40°F to 392°F.
4 | flow controller
Cole-Parmer’s Masterflex Flow Controller receives input from a flow sensor and responds by adjusting the speed of a Masterflex pump to maintain a set flow rate or dispense volume. It is no longer necessary to manually adjust pump flow rates as the pump tubing wears. The flow controller measures, controls and logs fluid path information. It is designed for the 33501 series Masterflex ultrasonic flow sensors. Users select the size of the ultrasonic flow sensor connected to the controller and choose continuous flow or volume dispense mode.