Global Pump Industry Mergers & Expansions

May 31, 2013

The concentration of the $38 billion global pump industry has again accelerated due to a number of recent acquisitions and geographic expansions, which are outlined in the McIlvaine Company’s report Pumps: World Markets.

The concentration of the $38 billion global pump industry has again accelerated due to a number of recent acquisitions and geographic expansions, reports McIlvaine Company in Pumps: World Markets.

The top 200 companies enjoy more than 50 percent of the global industrial pump business while another 5,000 companies average less than $4 million in sales each, according to the report.
GE, the 19th largest pump company, will move several rungs up the ladder as it acquires Lufkin Industries, Inc., a leading provider of artificial lift technologies for the oil and gas industry and a manufacturer of industrial gears, for approximately $3.3 billion. Artificial lift, used in 94 percent of the roughly 1 million oil-producing wells around the world, helps lift hydrocarbons to the surface in reservoirs with low pressure and improves the efficiency of naturally flowing wells. Lufkin will broaden GE's oil and gas artificial lift capabilities beyond electric submersible pumps (ESPs) to include rod lift, gas lift, plunger lift, hydraulic lift, progressive cavity pumps and a sophisticated array of well automation and production optimization controls and software. The ESP category of artificial lift is the only lift segment in which Lufkin does not currently compete.
McIlvaine says the world's fifth largest pump company, Weir, has acquired the R Wales group of companies, a Canadian-based manufacturer of specialty rubber and wear-resistant linings for the mining, minerals processing, and oil sands industries. The acquisition was completed on Feb. 15, 2013. With Canadian facilities in British Columbia and Ontario and a U.S. facility in Arizona, R Wales designs and manufactures rubber lining for pipes, tanks, chutes and hoses, and specializes in custom rubber and urethane-molded products, including slurry pump wear parts and mill liners. In 2012, the Wales Group generated revenues in excess of C$30m. The acquisition extends Weir's aftermarket position in the production and servicing of a wide range of rubber lined wear components for the North American oil sands and mining sectors and complements the existing customer base and product portfolio.
McIlvaine says Weir has also advanced its global foundry supply chain strategy, completing the acquisition of the business and assets of the Cheong Foundry in Malaysia on Feb. 6, 2013. Based near Kuala Lumpur, the facility supplies castings to a number of industries, including mining and power. The acquisition enables Weir to add foundry capacity to serve the Asia-Pacific region with high quality products from a best-cost sourcing region. In addition, agreement has been reached to acquire the plant, equipment and buildings of Xmeco Foundry Pty. Ltd, a specialist large casting foundry in Port Elizabeth, South Africa. Xmeco expands Weir's capacity and capability on the African continent, enabling the full product range to be locally produced.
The third largest pump company, Grundfos, will expand its Indian production capacity by setting up an additional unit, according to the report. As part of the expansion plans, with an initiative of making India as the second home, the company plans to invest Rs. 230 crores in the next five years.  Grundfos India has been growing at 30-35 percent since its inception in 1998. With the turnover of Rs. 318 crores in 2012, Grundfos is looking at Rs.1000 crores turnover in the next five years.
Number 22 in the rankings, Pentair, is planning to invest $50 million in expanding its operations in the UAE. According to McIlvaine, Pentair wants to increase its $400 million current turnover in the UAE to $1 billion. In particular, the company is looking to invest in a new pump manufacturing facility in the region.
Number 28 in world ranking, Gorman-Rupp Africa, has purchased the business of Pumptron with cash generated from operations. Pumptron has been an international value-added distributor for Gorman-Rupp for over 25 years and will further enhance the company's continuing international expansion. Founded in 1986, Pumptron is a provider of water-related pumping solutions primarily serving the construction, mining, agricultural and municipal markets in South Africa and, increasingly, throughout other sub-Sahara African countries. Pumptron is headquartered in Johannesburg with operating locations in Cape Town and Durban and had approximately $10 million in revenue during its fiscal year 2012, which includes sales of Gorman-Rupp products.
The Gorman-Rupp subsidiary, National Pump Company, purchased American Turbine Pump Companies (ATP). Founded in 1975, ATP is a group of companies that collectively are a leading manufacturer and distributor of energy-efficient vertical turbine and submersible pumps primarily serving agricultural, municipal and industrial markets both domestically and globally. During 2011, ATP had approximately $15 million in revenue from sales of its products through its Lubbock, Texas headquarters and two other locations in Houston and Fresno, Calif.
ITT Corporation has dropped from the top of the leader board when it divested its Xylem companies. But it is growing again, according to McIvaine. It has signed an agreement to acquire Joh. Heinr Bornemann GmbH.  Bornemann Pumps is a global provider of highly engineered pumps and systems for the oil and gas industry. Headquartered in Germany, Bornemann Pumps has a strong international installed base of multiphase pumping systems for the oil and gas market. The company also serves the industrial, food and pharmaceutical sectors. Founded in 1853, Bornemann has a solid record of growth with estimated fiscal 2012 revenue of $115 million and employs more than 550 employees globally.

Taco, Inc., of Cranston, RI, has purchased Hydroflo Pumps of Fairview, Tenn. Taco recently dedicated a $20 million addition to its headquarters in Cranston. The company, which has sales of $200 million a year, employs about 500 people, the vast majority at the facility in Cranston, with other workers in Fall River, Mass. and Ontario, Canada. It makes valves, pumps, tanks and electronics for heating and cooling. Hydroflo is a manufacturer of vertical and submersible turbine-driven pumps. Hydroflo also operations in Culver, Ind., Marion, Ark., Grand Island, Neb., Brownfield, Texas, and Fresno, Calif.
CRI Pumps, a Coimbatore, India-based manufacturer and exporter of pumps, recently signed a business transfer agreement with Pumps & Process Systems of the U.K. Chief Executive Officer of CRI Chaitanya Koranne said that CRI would shift the industrial pumping solutions manufacturing facility of Pumps & Process Systems in the U.K. to Coimbatore soon. CRI Pumps' annual turnover in 2011-2012 was Rs. 850 crore ($160 million), which was expected to increase to Rs. 1,000 crore this year. Nearly 20 percent of the turnover last year was from exports, and it was expected to go up substantially with the acquisition of the U.K. company. Pumps and Process Systems had a strong presence in sectors such as mining and CRI would be able to tap the opportunities in these areas, McIlvaine says.
Xylem, the current No. 1 pump supplier has acquired privately held Heartland Pump Rental & Sales, Inc. for approximately $29 million. Heartland Pump, headquartered in Carterville, Ill., has been a strong business partner with Godwin in dewatering pump rental, services and systems design since 1995. Godwin is part of the Xylem portfolio.  Heartland Pump employs approximately one hundred people with branches in Evansville, Ind., Horn Lake, Miss., and Nashville, Tenn.
The Liebherr Group has acquired concrete pump manufacturer Waitzinger, which is based in Neu-Ulm, Germany. Waitzinger Baumaschinen was founded in 1991 and employs a staff of nearly 60. It specializes in the development and production of truck-mounted concrete pumps, trailer concrete pumps and truck mixer concrete pumps. These products will now also be distributed via Liebherr's international sales and service organization.
McIlvaine Company says there is likely to be a continuation of globalization and consolidation of the international pump industry in the coming years.

For more information on Pumps World Markets, click here.

Source: McIlvaine Company

Sponsored Recommendations

Clean-in-Place (CIP) Solutions for Life Sciences Process Manufacturing

Learn how Emerson's measurement instrumentation can improve safety and reduce cross-contamination during CIP processes for life sciences process manufacturing.

Wireless Pressure Monitoring at Mining Flotation Cell

Eliminate operator rounds and improve flotation cell efficiency using reliable, wireless technology

Green hydrogen producer ensures quality of the network’s gas blend using a gas chromatograph

Case Study: Revolutionizing Green Hydrogen Blending with Precise Monitoring.

Overcome Measurement Challenges in Life Sciences

See how Emerson's best-in-class measurement instrumentation can help you overcome your toughest life sciences manufacturing challenges.