Hydraulic Institute Launches Pump Test Approval Program

Sept. 15, 2015

The Hydraulic Institute has launched a new Pump Test Lab Approval program to assist pump OEMs and other pump test laboratories in improving laboratory procedures, …

The Hydraulic Institute has launched a new Pump Test Lab Approval program to assist pump OEMs and other pump test laboratories in improving laboratory procedures, policies and pump testing protocols.

The program is also designed to help participating organizations adhere to the requirements of the international test laboratory accreditation standard (ISO 17025) concerning test measurement equipment.

The program has been designed around the new HI Program Guide for Pump Test Laboratory Approval (HI 40.7–2015), which summarizes the key elements of this voluntary program (the guide is available at no cost in the HI eStore).

Any qualified domestic or global corporation, research institution or laboratory can participate in the HI Pump Test Laboratory Approval Program. Facilities must have in-house capabilities to conduct pump performance tests to HI’s Methods for Rotodynamic Pump Efficiency Testing (HI 40.6–2014) standard, personnel that understand HI standards and pump testing techniques, and quality systems that ensure continued best practices after the audit. As part of the program, qualified laboratories agree to periodic audits of their facilities, records, equipment, and personnel to determine compliance with the HI 40.7 program guide and HI 40.6 standard.

In addition, HI says the program promotes an increased level of assurances to pump end-users as well as energy advocates and electric power utilities, which are working with HI to develop an Energy Rating label that accelerate the adoption of premium efficient pump systems.

READ ALSO: Hydraulic Institute Publishes Rotodynamic Pump Efficiency Prediction Guideline

"HI members from many pump OEMs assisted in the development of the 40.7 guideline," said Mark Heiser, test and validation lab manager for Xylem Inc. — Applied Water Systems and co-chair of the HI 40.7 committee. "It will be used as an assurance to our customers that our testing practices are sound and that our products will perform in the field as they do in the lab. Having more efficient pumps and pump systems is of great importance in reducing the overall consumption of energy in this country."

HI member company, Hydro Inc., is the first organization to have their pump test laboratory approved through the program.

For more information or to participate in the program please visit www.pumps.org/40.7 or contact the HI Program Manager at [email protected].

Sponsored Recommendations

Learn About: Micro Motion™ 4700 Config I/O Coriolis Transmitter

An Advanced Transmitter that Expands Connectivity

Micro Motion™ G-Series Compact, Drainable Coriolis Flow and Density Meters

Micro Motion G-Series Coriolis flow and density meters are ideally suited for Process Monitoring and Optimization applications, offering easy selection with pre-selected models...

Learn about: Micro Motion G-Series Coriolis Flow and Density Meters

The Micro Motion G-Series is designed to help you access the benefits of Coriolis technology even when available space is limited.

Micro Motion 4700 Coriolis Configurable Inputs and Outputs Transmitter

The Micro Motion 4700 Coriolis Transmitter offers a compact C1D1 (Zone 1) housing. Bluetooth and Smart Meter Verification are available.